Re: Replacing wires in the 47 Turn Signal Controller
Posted by Wesley Boyer On 2017/9/30 9:50:16
First I drilled out the two pins. pulled it apart and took lots of pictures. then found out I had to drill out two more braded pins which looks like it might had been a mistake. Wes
Attach file:
(240.59 KB)
(158.31 KB)
(85.20 KB)
(163.41 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=196216