Re: A Tale of Two Patricians
Posted by Packard Don On 2021/3/6 16:49:30
For getting the shift indent spring and tiny pad installed, I ended up using a brake tool which did an excellent job!
Simulated in this photo on a disassembled column, I simply hooked one end to the shaft anchor, then used the other end to push in the spring with the pad and it worked beautifully! For reference here is the image provided earlier in this blog pointing it out without which I would not have known to look for it.
Attach file:
4FADFF58-3CD8-45FB-B31C-EB309BE2241E.jpeg (149.46 KB)
3996894D-CB6B-46BC-9DDF-4BCEEA2BAA06.jpeg (73.31 KB)
Simulated in this photo on a disassembled column, I simply hooked one end to the shaft anchor, then used the other end to push in the spring with the pad and it worked beautifully! For reference here is the image provided earlier in this blog pointing it out without which I would not have known to look for it.
Attach file:
4FADFF58-3CD8-45FB-B31C-EB309BE2241E.jpeg (149.46 KB)
3996894D-CB6B-46BC-9DDF-4BCEEA2BAA06.jpeg (73.31 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=230988