Re: A Tale of Two Patricians

Posted by Packard Don On 2022/5/17 16:18:30

With a freshly charged battery, still no click so something is likely wrong with the rebuilt ignition switch which I suspect is the tumbler’s end tab did not properly engage into its hole when I assembled it. Hotwire, it started right up.

There was a temporary noisy lifter or two but they quieted down too. They lifters in it are the reproductions that were available when it was rebuilt sometime in the early ‘80s.

It’s running now a few feet away and I can hear an occasional and seemingly random misfire that will need some attention soon.