Float Needle
Posted by Bob E. On 2018/5/1 20:03:46
So, if anyone is out there a question:
The SC says to not mix the float needles from Primary and Secondary sides as the float needles and seats are mated.
First off, these aren't really needles (no point on them).
Secondly, the replacement ones in the carb rebuild kit are the same, so what do they mean in the SC?
Is it that the 'needle' will conform to the seat so once they are used don't swap them? (sort of like tappets and camshafts)??
Attach file:
(266.13 KB)
(250.84 KB)
The SC says to not mix the float needles from Primary and Secondary sides as the float needles and seats are mated.
First off, these aren't really needles (no point on them).
Secondly, the replacement ones in the carb rebuild kit are the same, so what do they mean in the SC?
Is it that the 'needle' will conform to the seat so once they are used don't swap them? (sort of like tappets and camshafts)??
Attach file:
(266.13 KB)
(250.84 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=202489