Re: Deven's 1951 Packard 300

Posted by Deven Vance On 2019/12/30 17:47:41
Worked a little on the '51 this past week. Changed the spark plugs, rotor, and cap. The points and condenser were new, so I left them. Also installed a new exhaust deflector and put a new set of floor mats from Kanter in! The old rotor was pretty rough. I have no clue how it was running while bent like that. It's the original delco-remy rotor. Finally, I took it on a short cruise since yesterday's rain washed the salt off the road. Performed amazingly and it's ready for daily driver season!

Attach file:



jpeg  (347.30 KB)
162555_5e0a7d47c7d99.jpeg 1920X1440 px

jpeg  (198.94 KB)
162555_5e0a7d6a7c1b8.jpeg 1920X1440 px

jpeg  (425.56 KB)
162555_5e0a7d9dc7ff8.jpeg 1920X1440 px

jpeg  (199.94 KB)
162555_5e0a7dc080d8c.jpeg 1920X1440 px

jpeg  (270.93 KB)
162555_5e0a7de10788f.jpeg 1920X1440 px

jpeg  (195.82 KB)
162555_5e0a7dfcdd7e3.jpeg 1920X1440 px

jpeg  (235.10 KB)
162555_5e0a7e1d988bf.jpeg 1920X1440 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=217980