clipper
Posted by mike james On 2019/6/8 22:31:31
Hello,
It's time to start the blog for the Panama. Soo I was trying to tune it up and put new plugs, cap, rotor, ect. picked up parts from napa got new wires they are not copper core like og hooked them up and no start. went through firing order, that checks out.Is it the wires? put old wires back on still no fire. Changed cap and installed new rotor to start have not changed points yet. Also set #1 to tdc looked like it was off so I moved rotor to what I thought was tdc. nope look at the manual first dummy!!!manual has #1 set at 37 degrees so I need to put it back where it's supposed to be. Should I use copper core wires? Bad thing is car ran before!!
Attach file:
(258.83 KB)
It's time to start the blog for the Panama. Soo I was trying to tune it up and put new plugs, cap, rotor, ect. picked up parts from napa got new wires they are not copper core like og hooked them up and no start. went through firing order, that checks out.Is it the wires? put old wires back on still no fire. Changed cap and installed new rotor to start have not changed points yet. Also set #1 to tdc looked like it was off so I moved rotor to what I thought was tdc. nope look at the manual first dummy!!!manual has #1 set at 37 degrees so I need to put it back where it's supposed to be. Should I use copper core wires? Bad thing is car ran before!!
Attach file:
(258.83 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=212287