Re: 1938 Super 8 1605 - adventures with a newbie

Posted by kevinpackard On 2023/3/3 10:45:55
Quote:

BDeB wrote:
Quote:

kevinpackard wrote

Lastly, I'm trying to find a belt for this thing. The pulleys are huge. The widest part is about 7/8" wide, and the length I need is about 50". The guys at NAPA looked at me like I was from the moon when I asked them about that size. I don't think I can use the length that is normal for a '38 Super....this car has an alternator, plus the water pump pulley is from a '39.

-Kevin


You might try a Gates Truck & Bus TR30537, top width .875", effective length 53.77" and outside circumference 54.125"
This works very well for a 22nd Series Custom 8 but might be a bit long for your application.
Perhaps parts suppliers for large trucks could provide a suitable belt.


Good information. I looked up Gates and they have many truck belts to choose from. I'm going to remeasure and make sure I get the right one.

-Kevin

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=254548