Re: '38 1608 V12 Project

Posted by blue40devil On 2020/2/23 17:03:24
Sat it on the bellhousing end after removing the studs and removed the pan. Lot of sludge in the pan but the upper crankcase looked pristine. This photo is to reference the oiling system.

Attach file:



jpg  (257.75 KB)
181435_5e52f6aca5cd5.jpg 1632X1224 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=219347