Re: '38 1608 V12 Project
Posted by R H On 2020/3/14 17:16:05
Bill.
Not really. Heated with a torch . I did media blast the cover to get it clean.
With the torch put black on the area. Then heated till it was gone. Then started building.
I was also thinking of putting a piece inside. But then a guy who teaches body shop said it can be welded.
Then I used a file and cutter in a drill to clean it up.
Have to look for pictures..might be on my blog.
Edit.
Between welds used a stainless brush and alcohol. And did not touch it ..after that. No hands.
Alcohol was in a squirt bottle.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=220002