Re: Vacation Car - 56 Patrician

Posted by CarFreak On 2023/9/9 17:19:13
So I did remove the limit switches and I did see that the one switch was not going back to closed after the plunger was pushed in and opened the contacts. So I sprayed a bunch of contact cleaner in there and actuated it and it appears to be working better, just need to test it on the car.

Currently working on getting the front bench seat installed and trying to get it to work. Surprisingly it went in a lot easier than when it came out. Trick is to unbolt the seat back and flop that forward as far as it goes and it slides right through the passenger door opening (helps to have the steering wheel removed). I did try the power seat option. The seat only goes up and down but not back and forth… the switch is working in all directions and I am getting power to the motor, but no action. It appears that the motor can easily be unbolted and maybe be serviced? Can I remove the seat motor with the seat in the car? Does the entire seat need to come apart to get it out? And is there a way I could clean the motor to maybe get it working? Thanks!

Attach file:



jpeg  IMG_2098.jpeg (352.97 KB)
203788_64fcef59e602a.jpeg 1920X1440 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=261385