Re: 1956 Clipper Deluxe
Posted by Ozstatman On 2020/3/31 18:25:00
Quote:
Brian,
To my inexpert eye, the wheel centres shown in photo #3 of Post # 19 appear likely to be Packard. Reason being they have the holes between the lug bolt holes for a "locating" stud. Don't believe Ford centres had "locating" studs because they used studs, not lug bolts, therefore no need for the locating stud.
Don't know if the V8's used the locating stud or not.
Attach file:
(75.17 KB)
b.wilson wrote: I suppose there was a plentiful supply of Ford wheel centres around in Australia then
Brian,
To my inexpert eye, the wheel centres shown in photo #3 of Post # 19 appear likely to be Packard. Reason being they have the holes between the lug bolt holes for a "locating" stud. Don't believe Ford centres had "locating" studs because they used studs, not lug bolts, therefore no need for the locating stud.
Don't know if the V8's used the locating stud or not.
Attach file:
(75.17 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=220703