Re: Resurrecting a 1951 Henney-Packard Parts Car

Posted by HH56 On 2020/4/22 16:59:22

You might contact one of the classic exhaust people such as Waldron or a vendor who does most of his business on ebay such as this one and see if they might have the pattern or info or maybe even could use your print.

If that is a non starter then I would imagine the exhaust system is the same from the manifold up to and including the muffler. If you could get a sedan print you could compare the two and if similar enough perhaps order a premade exhaust for a 127" Patrician or 300 and install as much of that as possible. If the tail pipe bends are a similar distance from the bumper a local muffler shop could probably either add a length to extend the premade tail pipe to move the bend back or make a new tailpipe to fit.