Re: Resurrecting a 1951 Henney-Packard Parts Car
Posted by Packard Don On 2021/3/9 22:51:01
I took a shot of the rear flange from the transmission just received after seeing if I could have installed the previous transmission in the other Henney-Packard if it were 7” shorter and it was expecting one longer. No way that would have worked!
This transmission came from a 1953 Henney Junior but that does not show the same part number as the 1951-1954 senior Henneys which are also the same as the long wheelbase sedans and limousines for 1953 and 1954. The Henney Junior has a single driveshaft while the others have a double shaft.
Attach file:
7364B479-D8B9-499A-99E2-903BDE6A983E.jpeg (127.56 KB)
This transmission came from a 1953 Henney Junior but that does not show the same part number as the 1951-1954 senior Henneys which are also the same as the long wheelbase sedans and limousines for 1953 and 1954. The Henney Junior has a single driveshaft while the others have a double shaft.
Attach file:
7364B479-D8B9-499A-99E2-903BDE6A983E.jpeg (127.56 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=231090