Re: Resurrecting a 1951 Henney-Packard Parts Car

Posted by PackardDon on 2022/5/15 21:27:24
I took a little break this afternoon from moving racks of parts and worked a little on the Henney. Mainly I want to take in the wheels to get the new tires mounted which I’ll need when it comes time to install the rear end. I thought I had three loose wheels so I was going to leave one tire mounted as the spare but in the end it turned out that I had only two so had to remove both fronts.

One thing I would like to do while here is to take out the rear stabilizer as it has very bent connecting rods with one even being bent to a J shape! Taking out the stabilizer will let me see if there is enough swing to remove the broken gas tank bolt which otherwise does not appear that it can be removed.

Attach file:



jpeg  6D0E6E33-EB99-4648-A1EC-B3B221392292.jpeg (476.75 KB)
60923_6281b5d31cb32.jpeg 1280X960 px

jpeg  1851DF65-7D41-497D-91C0-F8E9DC261D4F.jpeg (455.60 KB)
60923_6281b66c1dded.jpeg 1280X960 px

jpeg  82B95186-6D87-44CA-BC27-C140AE2F2540.jpeg (410.69 KB)
60923_6281b684c9494.jpeg 1280X960 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=243910