Re: Resurrecting a 1951 Henney-Packard Parts Car
Posted by Packard Don On 2023/1/23 18:04:18
It’s finally together! I use a piece of solid copper wire to help keep the pesky syncro from falling loose.
Now the top cover it being cleaned and I’ll see about installing new shaft seals, then I can get busy on the overdrive portion. That will take a while as nothing there has been cleaned yet other than the housing.
Attach file:
3678B80E-42BB-42B3-9FF4-B7779297E9C8.jpeg (135.90 KB)
Now the top cover it being cleaned and I’ll see about installing new shaft seals, then I can get busy on the overdrive portion. That will take a while as nothing there has been cleaned yet other than the housing.
Attach file:
3678B80E-42BB-42B3-9FF4-B7779297E9C8.jpeg (135.90 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=253020