Re: Resurrecting a 1951 Henney-Packard Parts Car

Posted by Packard Don On 2024/3/23 21:55:56
I need some help!

The brake return springs are yellow and light blue with the yellow being heavier. Same with the shoe hold-downs except that the yellow, which appears to have a slightly finer wire, is considerably longer. For these 14” brakes, the shoes are the same rather than having the friction material shorter on one.

I understand that the yellow brake return spring should be to the front. Does that apply to rear brakes too? When I took apart the left side it had the yellow to the rear. Would the yellow hold-down spring also be on the front shoe?

Left rear before disassembly with heavier yellow springs on the back shoe.
NOTE: This photo is for reference only as it was all too rusty to use.
Original Image

All reassembled today (no return springs yet) with the yellow hold-down springs to the front.
Original Image

Incidentally, the backing plate is from one car, the shoes from another and the drum from yet another! This side was so rusty that I had to source all of the pieces wherever I could find them.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269165