LS1 Powered Packard could be worlds fastest ???

Posted by Jonathan On 2020/5/26 11:44:25

So I took my build down a different road, I decided to do an LS1 swap from a 99 vette. No need to tell me how ignorant I am for this my father reminds me weekly. So I started with a pure 54 Clipper Panama. After driving it for a few weeks I just thought what if it had more power and a better suspension and could stop when I applied the brakes. So out with the old and in with the new I removed the inline 8 and transmission and replaced it with an all aluminum 5.7 liter fuel injected engine mated to 4l60 automatic transmission. This required more than just a few new parts, I replaced the fuel tank, radiator, wiring harness, relocated the battery all new fuel lines, basically everything but the sheet metal. Next I measured twice and cut once and replaced the rear axle with one from a 2001 ford explorer which now gave me rear disc brakes, I set the suspension up as a 4 link style and installed air bags with custom mounts/ I installed the tanks and pumps in the trunk along with the battery. The front suspension was a mustang II style that also included front disc brakes, I used a hot rod style master cylinder and mounted it to the frame below the floor pan. The wheels are from Detroit Steel wheel co. Mobsteel wheels still working out the kinks and getting ready to install the vintage air.

Attach file:

---

  (485.04 KB)


  (349.26 KB)