Wes - that was a very informative video, thanks for sharing that. I actually learned a lot from it.
Not much done on the car yesterday. I'm waiting for the new spark plug wires to come in, but I did go ahead and replace the old spark plugs.
The old ones looked pretty bad. The ends of all of them were pure black. Lots of crud around the necks of them too. I blasted out any debris with air before I removed them, then carefully removed the plugs and vacuumed around the holes to be sure there was no debris left.
New plugs (Autolite 308) went in and torqued to 25 ft lbs.
-Kevin
Attach file:
(57.32 KB)
(112.40 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=225243