Re: KPack's 1954 Panama

Posted by Packard Don On 2020/10/27 2:15:45

The pad on your cam looks quite worn so, as long as it's in the same location and the angle is the same, it should be fine. However, the inlet on yours should be at the rear but if it isn't, you'll have to remove the housing and reverse it. It too difficult but best to look up ad follow the reassembly procedure as outlined in the shop manual.

The line from the pump to the filter should be a single piece of steel tubing and if it is, it can't be installed any other way. All 1951-1954 Packards had the front as the outlet so odd they would sell you one that is so wrong.