Re: KPack's 1954 Panama

Posted by kevinpackard On 2020/11/12 11:54:00

Paul - I was considering using a bit of this stuff on the underside of the hood to stop vibrations, then cover it with a correct fiberglass mat. I just don't know how well it will hold up to the heat, even with the fiberglass insulation. I might look into the Eastwood stuff if it's designed for high heat.

John - I didn't do any relief cuts. The curvature of the roof makes the edges of the mats go off in different directions, and I just cut pieces to fit until the whole roof was covered. Then I went through and taped every seam and all outside edges with aluminum tape. It seems solid enough.

-Kevin