Re: KPack's 1954 Panama

Posted by HH56 On 2020/11/19 13:28:59

On the question of the approximate degrees per position on the temp gauge, a few years ago another poster who posted under DrewLA did some experiments on his 52. If you are curious and do not have an actual thermometer reading you can compare his ohm readings of the sender at a specific temperature to get an approx temperature equivalent with the ohm readings at the various needle positions. His results should be relatively close to what you could expect on a 54. With the position of the needle barely on the M, based on the charts I would put the temp somewhere just above 190 degrees.

Attach file:

---

  (55.10 KB)