Re: KPack

Posted by kevinpackard on 2021/4/8 9:51:28
David - correct, there are no gaskets between the shims and the backing plate (the shims and backing plate were reassembled correctly on the car). I was talking about the gasket that goes between the backing plate and the outer oil seal retainer. See the picture below. I then used gasket maker to replace the gasket that goes between the oil seal retainer and the oil guard.

I took pictures of every step of disassembly and double checked to make sure I was reassembling the correct way.

-Kevin

Attach file:



jpg  Outer oil seal retainer gasket.jpg (409.67 KB)
1059_606f268b72a44.jpg 975X1300 px

jpg  Oil guard gasket.jpg (307.15 KB)
1059_606f2693bfcae.jpg 975X1300 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=232310