Re: KPack's 1954 Panama

Posted by HH56 On 2021/5/19 11:23:46

Does the temp gauge work properly? If so, the regulator and voltage supply to the gauge would seem to be OK and gauge could be faulty. Just for grins though check the connections on the back of the gauge. I know it is hard to tell looking straight on but compare the two gauges from several angles and see if there is a chance the cluster was removed at some time and during that process the fuel gauge needle got bent and is riding against the glass or face of the gauge. If you can visually see that it is OK then finding a new gauge would probably be a good idea.