Re: KPack

Posted by kevinpackard On 2022/6/13 14:55:19
I had some time over the weekend and was able to change the oil on the Panama. I ended up not throwing anything in the oil before I changed it. The old oil came out pretty black....definitely time for a change. I got a new filter, Fram C-4, and refilled with 7 quarts of Shell Rotella 15W-40. I used 10W-30 last time. With the 15W-40 my oil pressure seems better at idle, and is steady at 33-35 PSI at normal driving speeds.

The engine sounds nice and smooth. The more I drive it, the better the engine seems to get. When it's warmed up to operating temp there is no shudder or movement of the block, and it's nearly silent. The only thing that drives me nuts is my vacuum pump/fuel pump making that annoying hollow noise.

I have lots of work to do on the interior. Once it warms up here I will pull off the interior trim, sand it down, prime and repaint. Then I'm going to try my hand at doing door panels. Lastly, I'm going to have to do something about the rear seat. The top of it is disintegrating and is flapping around in the breeze while I drive. It's incredibly annoying.

-Kevin

Attach file:



jpg  dirty oil.jpg (58.19 KB)
1059_62a79618d56e2.jpg 768X1024 px

jpg  Seat crumbling.jpg (95.76 KB)
1059_62a7962434452.jpg 1024X768 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244933