Thanks Howard. You're right, I was able to get the needles off with some finger pressure. The speedo took a good amount of force to get off.
I took the face off my old fuel gauge and experimented with painting that. I used some dark red metallic paint from Testors, shot through an airbrush at about 30 PSI. I had to do a couple of coats to build up the color. Testors leaves a glossy finish, so I'll probably follow it up with a flat finish to help it look stock.
The color is a bit more red and less maroon than the original. The fuel gauge shown is NOS....I'm assuming the color is accurate. But this is the only color I could find that was close. What do you guys think? I'll paint the others if you all feel that it is acceptable.
I cleaned, sanded down, and repainted the gold cluster bezel. I used Testors Gold, which was actually a pretty close match. I'll topcoat with a gloss to protect the paint.
Attach file:
Repainted gauge face.jpg (130.71 KB) Repainted bezel.jpg (78.71 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=250809