Took some time today to start on my cleaning/rust treatment of the gas tank. I called a place to boil it and they said they aren't allowed to do that anymore, and it would be upwards of $400 to cut it open and clean it. Well, that's not in the budget, so I turned to DIY solutions... which brought me to Sterosol milkstone remover (phosphoric acid). I first degreased the tank with "purple power" and then rinsed the tank, trying to get as much debris as I could out (found the float in pieces in the tank). I've got the acid sitting in the tank currently. I took a picture after 6 hours and it's doing a fine job. Below are before and afters. Should be good to rinse out in the morning. Also, I had my helper to assist me. :)
On another note, I spent some time on the doors - three open and close, not perfectly but they'll stay closed which iOS a win for now. Passenger side front door is stuck close and has been since I got the car. I'll get to it, one day.....
Attach file:
(252.33 KB)
(345.61 KB)
(383.77 KB)
(464.79 KB)
(261.46 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=228944