Re: Cortes121

Posted by cortes121 On 2021/4/17 14:38:13
Howard,

I will hook up a meter and check the ohms readout, thank you very much for providing the bit about the crimp connector, that makes total sense.

And Thanks for posting the link to the gasket - that makes life super simple. Sometimes the bumps in the road to getting a car back on the road can get discouraging, always feels good when there is a clear path forward. :)

As for the trunk... I've seen that mod on this forum, and I believe Ross has stated it should work (correct me if I'm wrong here). I wouldn't mind doing that mod... if and when I can get into the trunk. The trunks locked and I don't have the key. I know i could get a key made by removing a door tumbler, but The doors are so rusty, if i remove a door handle and tumbler, the area where it is held to the door may disintegrate. I imagine many here have faced this issue. I was going to ask how to remove the back seat (i'll poke around the repair manual) but i've been reluctant as i'm going to have to crawl into a nasty, rusty possible rat turd filled trunk in the dark. I've attempted picking the lock but i'm no pro.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=232619