Re: Cortes121

Posted by cortes121 On 2021/7/4 18:06:14

Took some time to mount the fuel tank. Went relatively smoothly. First I compared the old fuel sender to the new, and bent the new one to match the travel of the old. I’ve also installed the new fuel pump up front. I installed an after marker fuel filter just before the pump, to catch and residual crud in the line from the tank to the pump. As I was all set to crank the car over, when I turned the key the starter labored for a bit then wouldn’t do anything. Back in early 2021 I got it to turn over nicely and even fired off ether, so not sure what’s wrong from it just sitting. The motor still turns freely and the battery was just charged, and read 12.63 volts. Should I yank the starter to confirm it is working? It’s a hassle so I’m open to suggestions before attempting that…

Attach file:

---

  979319A2-D1E5-44A5-B699-EBFAFE39AA3F.jpeg (146.32 KB)


  D30BB7FE-55B7-4BB5-AD2D-3B039883F8BA.jpeg (121.67 KB)


  58FCDE28-ACDB-4BD7-BFBA-8C1E4AD4E2A8.jpeg (176.56 KB)