Re: Mike's 53 Caribbean

Posted by Tobs On 2022/4/24 16:10:05

Yeah, old wiring in this car. I cleaned the rear bulbs and sockets, and ran a ground from the front turn Signal reflectors to the junction blocks on the front fenders, and the turn signals are working again! I connected one circuit from my hazard switch to the brake switch wire (green) on that 6 way connector on the steering column. That got the rears blinking. Now I have run a wire to the parking lights, which are no longer used. They will be my front hazards. That worked in the clipper, and should do fine here.