Re: Mike's 53 Caribbean

Posted by HH56 On 2023/10/12 14:52:59

If you still have the stock Delco setup cutout relay in regulator or circuit breaker as Packard called it should kick in at the generator rpm listed for the 2631 chassis. The 6.3v measured should go up depending on rpm but not go over 7.4v. When engine slows, the cutout will open once generator rpm goes below the specified number and voltage will drop back to around battery level again. GEN light will flicker or go solid red when this happens.

Attach file:

---

  specs.jpg (175.78 KB)