Re: 56 Caribbean Convertible Rejuvenation
Posted by HH56 On 2024/12/10 14:37:47
Quote:
While I was back there I got distracted by the reading light. I had this idea to convert it from a reading light to a dome light since I dont have the switch.
I am confused by that statement. Is the switch which I believe is usually located on the right side top cylinder cover or bolster at the side of the rear seat completely missing or just not working. If missing you should be able to find another and if you wanted a switch for the drivers side you could add a second switch in parallel on the left side cover and run a single wire across the floor under the seat or carpet to connect it to the wire going to the light. Since it only requires connection of ground thru a switch for the bulb to light it should also be a simple job to add or connect existing switches that would be operated by the doors. If you are trying to relocate the lamp assy from the stock location then that is another matter.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=279908