Re: 1941 Packard 160
Posted by 29tons On 2022/12/18 14:40:45
There was a old repair on the back edge of 1 of the front fenders that had metal overlapped. Both the fender and the patch had rusted out again. I made a new piece of metal put a slight curve in it butt welded it and painted it.
Attach file
:
40E7DE81-D007-4846-8ADE-C7674CEBD3FD.jpeg
(330.72 KB)
35B2183F-CCC7-46D7-A3D7-C3CD96FE7E2B.jpeg
(284.60 KB)
D720BD4F-FB09-42CD-B96D-D792241EBC24.jpeg
(141.12 KB)
A3570DA3-CCDF-4621-AD5E-EDA1CA788A45.jpeg
(150.07 KB)
DC2C8065-9D48-4F1D-B156-4402FE20B819.jpeg
(135.73 KB)
0C002C29-4489-463F-9145-A0582E622928.jpeg
(90.79 KB)
7C1AF6A1-5794-4D0F-993F-71C6F0A88E5F.jpeg
(169.27 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251714