Re: hph's 400

Posted by HH56 On 2022/9/21 10:30:35
If it works half as well as the photos would suggest it might be a good option. No idea if there are franchises but the DIY kit starting at $595 would be a non starter for many unless it works well and you have a lot of parts to do. I would hope their special cleaner works as well as they claim and the spray paint has some filling and self leveling ability. Didn't see much mention of polishing but shiny pits or scratches are just as noticeable as dull and rusted ones.

Someone mentioned trying a Caswell kit and I can speak from experience about them. They do work as advertised but only with specific base metals and the size of object to be plated is limited. I can also assure you the parts need to be polished and absolutely without question totally clean and grease free. A spec of anything not bare clean metal or a preliminary plating layer anywhere and you will have a nice unfinished area in the middle of an otherwise acceptable piece.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=248477