Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Posted by Don B On 2024/4/19 19:12:11
Received the correct generator mount arm from Flackmaster today….de-rusted, primed, and painted it. Then, went to remove the incorrect one and ran in to a challenge.
This was a piece that someone fabricated by welding two bolts with different threads together and then welded the nut in place to serve as the spacer and the means of inserting the stud. Clearly, it was installed first!. Fortunately, It was no match for this.
Once I cut off a piece, it came right out and I was able to install the correct arm and spacer.
This was a piece that someone fabricated by welding two bolts with different threads together and then welded the nut in place to serve as the spacer and the means of inserting the stud. Clearly, it was installed first!. Fortunately, It was no match for this.
Once I cut off a piece, it came right out and I was able to install the correct arm and spacer.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=270470