Re: Chuck's 48 Deluxe Sedan
Posted by HH56 on 2010/6/16 15:43:54
Looks like it might work. The original has the feed wire on one stud and the other stud is attached to a buss bar on the light switch which provides the mounting. The extra mounting screw tabs on that would not be used and if they don't interfere, all is well. If they do, then not a big job to mount the breaker close by and just run a short decent ga wire to the buss bar.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=54734