Re: BigKev

Posted by Bob J On 2022/12/8 19:46:37

Mine uses 1/4-28 x 3/4 hex caps. A total of 6.
4 across the top:
2 on the drivers side either side of the steering shaft
1 at the centre hump
1 on the passenger side
Then 2 more, with 1 at the centre side wall on both sides.
Two 1/4-28 x 1 1/2 flathead screws then hold the floor board with 1 at the gas pedal, 1 at the same location on the passenger side and then 2 in front of the seat pan side.