Re: BigKev
Posted by BigKev On 2022/12/20 21:02:34
A little bit of progress tonight.
The new battery box and retainer arrived from John Ulrich. You can see in the picture how the old box had been patched before.
So what got dropped into place.
Next I moved installing the column mounted turn signals. The built in hose clamp that came with it was junk and snapped before it was even close to tight. So I used a thicker hose clamp that I had and that worked well.
Then I tied it into the new harness.
I then spliced in the 50 Amp maxi-fuse into the main harness feed from the starter battery lug. Then I had to extent that 10ga wire as it needed to loop through the amp meter next.
Attach file:
Screenshot_20221220_194826_Gallery.jpg (342.80 KB)
Screenshot_20221220_194855_Gallery.jpg (213.78 KB)
The new battery box and retainer arrived from John Ulrich. You can see in the picture how the old box had been patched before.
So what got dropped into place.
Next I moved installing the column mounted turn signals. The built in hose clamp that came with it was junk and snapped before it was even close to tight. So I used a thicker hose clamp that I had and that worked well.
Then I tied it into the new harness.
I then spliced in the 50 Amp maxi-fuse into the main harness feed from the starter battery lug. Then I had to extent that 10ga wire as it needed to loop through the amp meter next.
Attach file:
Screenshot_20221220_194826_Gallery.jpg (342.80 KB)
Screenshot_20221220_194855_Gallery.jpg (213.78 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=251794