Re: BigKev
Posted by BigKev On 2023/1/13 17:42:34
The rear backing plate was ugly. I was cleaning it up to paint and realized both the anchor pin eccentric and the rear shoe eccentric was rust frozen. It lots of penetrator and heat to even break them free of the backing plate. Thr pin adjusted is free and working.
But on the other eccentric, the little "wheel" that is supposed to spin as the rear shoe moves on is still frozen solid. It's currently soaking in a cup of PB blaster overnight to see if that will free it.
Otherwise, I make have to source a replacement eccentric. Hopefully the other side isn't as bad.
Also this is what I mean by the back passenger is unacceptable right now. If I needed to I could back the 54 out and then move the trashcans. But hopefully I won't have to.
The car almost looks like it just hovering.
Attach file:
Screenshot_20230113_164023_Gallery.jpg (151.16 KB)
Screenshot_20230113_164047_Gallery.jpg (182.59 KB)
But on the other eccentric, the little "wheel" that is supposed to spin as the rear shoe moves on is still frozen solid. It's currently soaking in a cup of PB blaster overnight to see if that will free it.
Otherwise, I make have to source a replacement eccentric. Hopefully the other side isn't as bad.
Also this is what I mean by the back passenger is unacceptable right now. If I needed to I could back the 54 out and then move the trashcans. But hopefully I won't have to.
The car almost looks like it just hovering.
Attach file:
Screenshot_20230113_164023_Gallery.jpg (151.16 KB)
Screenshot_20230113_164047_Gallery.jpg (182.59 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=252730