Re: BigKev
Posted by BigKev On 2023/1/16 20:48:13
Thanks, I'll see what Napa has instock as I really need to get these back together tomorrow.
Today, I managed to get the rear driverside axle replaced and that backplate back on. Also mounted all the wheel cylinders and hoses. Had to run to Napa and get crush washers for the hoses as they were not included in the rebuild kit.
While at Napa, i bought all the needed legnths of hardline and cut and bent them up.started to bend up. I still need to make right rear line and the line between the master cylinder and the rear hose connection. Everything, except the juntion blocks in the brake system will be new. The lines were in horrible condition.
Attach file:
Screenshot_20230116_194012_Gallery.jpg (200.85 KB)
Screenshot_20230116_194046_Gallery.jpg (125.48 KB)
Screenshot_20230116_194106_Gallery.jpg (249.26 KB)
Today, I managed to get the rear driverside axle replaced and that backplate back on. Also mounted all the wheel cylinders and hoses. Had to run to Napa and get crush washers for the hoses as they were not included in the rebuild kit.
While at Napa, i bought all the needed legnths of hardline and cut and bent them up.started to bend up. I still need to make right rear line and the line between the master cylinder and the rear hose connection. Everything, except the juntion blocks in the brake system will be new. The lines were in horrible condition.
Attach file:
Screenshot_20230116_194012_Gallery.jpg (200.85 KB)
Screenshot_20230116_194046_Gallery.jpg (125.48 KB)
Screenshot_20230116_194106_Gallery.jpg (249.26 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=252849