Re: BigKev
Posted by Larry Reber On 2023/4/26 21:03:40
What I found on my tank sender was the wiper button to coil was stuck due to crud that had vented into the chamber from the fuel.
You can drill out the rivets and GENTLY split the case and try to loosen the wiper button.
Use CAUTION around the resistive sender wire cardboard. Try not to move it.
Carefullly reassemble.
I ended up mucking up the resistive wire and bought a GM sender and drilled out a hole for the suction tube and added some length to get to the bottom area of the tank..
I have an operational gague that in the 1/4 full to 3/4 full bounces like a 1950's dog head in the back window . :)
Attach file:
P1050094.JPG (110.66 KB)
P1050090.JPG (201.83 KB)
You can drill out the rivets and GENTLY split the case and try to loosen the wiper button.
Use CAUTION around the resistive sender wire cardboard. Try not to move it.
Carefullly reassemble.
I ended up mucking up the resistive wire and bought a GM sender and drilled out a hole for the suction tube and added some length to get to the bottom area of the tank..
I have an operational gague that in the 1/4 full to 3/4 full bounces like a 1950's dog head in the back window . :)
Attach file:
P1050094.JPG (110.66 KB)
P1050090.JPG (201.83 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=256255