Re: BigKev
Posted by BigKev On 2023/4/27 19:37:22
Got the new positive cables installed today. Still need to get the ground straps.
So first shot is new 1/0 cable with a terminal boot hooked to the battery.
Second shot are the cables hooked to the cut off switch. In this shot I still needed to secure the cables to the frame. You can see how the switch is pretty protected in the frame. The front edge is protected by the battery.
Last shot is the new 1/0 cable connected to the solenoid. The old cable is on the left for comparison. Probably 4 or 6 gauge.
Also added the wire boot for starter trigger wire.
Attach file:
Screenshot_20230427_192952_Gallery.jpg (231.65 KB)
Screenshot_20230427_193017_Gallery.jpg (169.28 KB)
Screenshot_20230427_192932_Gallery.jpg (168.88 KB)
So first shot is new 1/0 cable with a terminal boot hooked to the battery.
Second shot are the cables hooked to the cut off switch. In this shot I still needed to secure the cables to the frame. You can see how the switch is pretty protected in the frame. The front edge is protected by the battery.
Last shot is the new 1/0 cable connected to the solenoid. The old cable is on the left for comparison. Probably 4 or 6 gauge.
Also added the wire boot for starter trigger wire.
Attach file:
Screenshot_20230427_192952_Gallery.jpg (231.65 KB)
Screenshot_20230427_193017_Gallery.jpg (169.28 KB)
Screenshot_20230427_192932_Gallery.jpg (168.88 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=256290