Re: BigKev's 1937 115-C Convertible Coupe
Posted by BigKev On 2023/10/7 17:15:27
I got all the metal components of the top assembly mocked up to see what fasteners I am missing.
Flackmaster was able to provide me two wooden top bows. The front bow needs to be refined still.but the general shape is close. The rear bow is ready to install, but sadly does not fit a coupe. So we have decided it must be the rear bow for a convertible sedan.
So I'll have to find a pattern for the rear so I can make one.
One question I have is what are the fasteners for this area? It's for sure larger that the other fasteners. I'd imagine there are a few washer and a nut as it slides in a slot.
Attach file:
Screenshot_20231007_170406_Gallery.jpg (188.85 KB)
Screenshot_20231007_170347_Gallery.jpg (151.79 KB)
Screenshot_20231007_170329_Gallery.jpg (205.55 KB)
Flackmaster was able to provide me two wooden top bows. The front bow needs to be refined still.but the general shape is close. The rear bow is ready to install, but sadly does not fit a coupe. So we have decided it must be the rear bow for a convertible sedan.
So I'll have to find a pattern for the rear so I can make one.
One question I have is what are the fasteners for this area? It's for sure larger that the other fasteners. I'd imagine there are a few washer and a nut as it slides in a slot.
Attach file:
Screenshot_20231007_170406_Gallery.jpg (188.85 KB)
Screenshot_20231007_170347_Gallery.jpg (151.79 KB)
Screenshot_20231007_170329_Gallery.jpg (205.55 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=262556