Re: BigKev's 1937 115-C Convertible Coupe
Posted by BigKev On 2023/10/21 21:13:20
Rought pieces cut out. These are cut oversize to give me lots of meat to wittle down to shape. This is being made from three layers glued together. Center and end end prices oriented to give strongest grain directon where needed. So 3 layers of 3 pieces each. So 9 pieces today. Each layer joint is offset.
Anyway here is the first glue up the center pieces of layer 1 and 2. Once that glue is cured, then I will glue center piece 3 to the stack. Then the end pieces get glued in. Once everything is cured, then the shaping will begin.
Attach file:
Screenshot_20231021_210650_Gallery.jpg (149.04 KB)
Anyway here is the first glue up the center pieces of layer 1 and 2. Once that glue is cured, then I will glue center piece 3 to the stack. Then the end pieces get glued in. Once everything is cured, then the shaping will begin.
Attach file:
Screenshot_20231021_210650_Gallery.jpg (149.04 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=263185