Re: BigKev's 1937 115-C Convertible Coupe

Posted by BDeB On 2024/2/2 20:23:08
Quote:

BigKev wrote:
Quote:

BigKev wrote:

How does the fuel line route in the rear from the outside of the frame to the tank?


I am still looking for pictures of how the fuel line transitions from the outside of the frame rail to the tank. If anyone with a 120 or 115 can assist, that would be grateful.


Here are some photos of the fuel line with the tank removed, going from rear to front.
From the connection on the fuel sender, the line goes under the frame cross member and in front of the fuel tank right mounting bracket then bends under the frame rail to follow the kick up above the rear axle with clips tight to the frame then bends straight away from the frame and above the rear body mount to clips on the rear and front running board braces with a standoff clip halfway between. There is a pair of bends still away from the frame to pass under the rear of the front fender then straight to the bulkead fitting.


Original Image

Attach file:



jpg  P2020018.JPG (524.78 KB)
1137_65bd94f4e7c52.jpg 1600X1200 px

jpg  P2020019.JPG (531.22 KB)
1137_65bd9513a2049.jpg 1600X1200 px

jpg  P2020020.JPG (521.06 KB)
1137_65bd95266a32d.jpg 1600X1200 px

jpg  P2020021.JPG (542.36 KB)
1137_65bd953695767.jpg 1600X1200 px

jpg  P2020022.JPG (479.73 KB)
1137_65bd954c91bc6.jpg 1600X1200 px

jpg  P2020023.JPG (487.09 KB)
1137_65bd955f70351.jpg 1600X1200 px

jpg  P2020024.JPG (531.49 KB)
1137_65bd957590c8b.jpg 1600X1200 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=267487