Re: BigKev's 1937 115-C Convertible Coupe
Posted by BigKev On 2024/4/3 17:10:38
I installed the new window channel from Bob and it helped as it moved the window 1/16" closer towards the division bar. But still not enough. I'm now convinced its how either the glass was cut, or they used too thick of a setting channel. Here is how thick the channel is.
Can some measure how far their glass sticks out past the metal on top of the frame?
For my windows it's for sure different in each side. The passenger side windows sticks out more than the driver side does.
Based on that measurement I'll know how much to have the glass shop grind off.
Also, if you know, is the glass even with the metal guide loop.at the bottom?
Can some measure how far their glass sticks out past the metal on top of the frame?
For my windows it's for sure different in each side. The passenger side windows sticks out more than the driver side does.
Based on that measurement I'll know how much to have the glass shop grind off.
Also, if you know, is the glass even with the metal guide loop.at the bottom?
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269695