Re: BigKev's 1937 115-C Convertible Coupe
Posted by BigKev On 2025/3/25 20:52:48
Yesterday I seam sealed everything I welded in.
Today I made the wood tack strip that goes in that floor channel.
It's an inverted triangle profile. The front angle is steeper than rear on. Also the rear side requires two concave reliefs to me carved into for two bumps in the floor pan.
I just need to drill the counter sunk screw holes.
Today I made the wood tack strip that goes in that floor channel.
It's an inverted triangle profile. The front angle is steeper than rear on. Also the rear side requires two concave reliefs to me carved into for two bumps in the floor pan.
I just need to drill the counter sunk screw holes.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=283792