Re: 1937 120 Conv. Sedan - Blanche
Posted by Bob J On 2024/3/28 13:52:09
I am not sure. I had mine done by KM Lifestyle and it had the female fitting on it when they sent it back.
That said, the line was new that I attached to it and there I used a compression fitting. I expect you can do the same with the female fitting on the sender units line too.
I did a 'belt & suspenders' thing too, with the tank being coated I did not count on the tanks body being able to carry the ground, so I added a ground strap to the sender unit and connected it to the frame once installed. All works well.
Bob J.
Attach file:
tank fitting.JPG (578.88 KB)
That said, the line was new that I attached to it and there I used a compression fitting. I expect you can do the same with the female fitting on the sender units line too.
I did a 'belt & suspenders' thing too, with the tank being coated I did not count on the tanks body being able to carry the ground, so I added a ground strap to the sender unit and connected it to the frame once installed. All works well.
Bob J.
Attach file:
tank fitting.JPG (578.88 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269388