Re: 1937 120 Conv. Sedan - Blanche
Posted by 37Blanche On 2024/3/28 17:09:13
So I am going to remove the fitting from the old and then solder onto the new one. Think that’s the easiest route.
That’s the next thing I need to solve before I can finish up the gas tank and then move to the exhaust.
So moved onto to some other things.
Put the grommet and hose connector to the tank.
Cleaned up 86 years of gunk from the rear shocks/springs.
Painted the toe board
Removed the headlights but had to spray special sauce on the nuts to get the stanchions removed.
Time for dinner
That’s the next thing I need to solve before I can finish up the gas tank and then move to the exhaust.
So moved onto to some other things.
Put the grommet and hose connector to the tank.
Cleaned up 86 years of gunk from the rear shocks/springs.
Painted the toe board
Removed the headlights but had to spray special sauce on the nuts to get the stanchions removed.
Time for dinner
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269401