Re: 1937 120 Conv. Sedan - Blanche
Posted by 37Blanche On 2024/4/7 17:16:23
Today I dry fit the exhaust. Thanks the Txgoat and Bob for guidance. Will get tank on later this week.
Was also able to add the insulation to the firewall. Got about 99% coverage. Left the screws available for toe board. Just have a feeling I am going to need to get behind there again at some point. I did not cover the cables either. Was able to get most of the holes and other gaps covered.
Also I realized I removed the grommet for my steering column. In order to replace I assume the required removing the steering wheel?
Was also able to add the insulation to the firewall. Got about 99% coverage. Left the screws available for toe board. Just have a feeling I am going to need to get behind there again at some point. I did not cover the cables either. Was able to get most of the holes and other gaps covered.
Also I realized I removed the grommet for my steering column. In order to replace I assume the required removing the steering wheel?
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269907