Re: 1937 120 Conv. Sedan - Blanche

Posted by Bob J On 2024/4/15 13:57:55
My experience:
I had my original (super rusty!) tank relined and coated, but I had KM Lifestyle make a new sending unit for me. I did find, as you have, that the pickup touched the bottom of the tank before the top ring seated, I slowly bent the pick-up and test fitted it until it just cleared the bottom of the tank, you do not want to do too much or the last bit of gas will not get picked up.
So far so good with gas pick up by the pump.
Bob J.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=270336